Contenuto Principale
FROM STATUS-CONSCIOUS LUXURY SALOON TO POPULAR YOUNG CLASSIC PDF Stampa E-mail
Scritto da Administrator   
Giovedì 19 Settembre 2019 15:34

Premiere In September 1979, #mercedesbenz unveiled its new generation of luxury-class saloons at the IAA in Frankfurt – the S-Class (model series 126).

The range initially comprised seven models; there was a choice of four engines (from the 2.8-litre six-cylinder carburettor engine with 115 kW/156hp to the 5.0-litre V8 light-alloy engine with petrol injection and 176 kW/240 hp) and two body variants – in addition to the normal version, there was a long-wheelbase version, as had been offered for the past two generations of luxury saloons. At 140 millimetres, the increase in wheelbase was more pronounced than before (3,075 millimetres instead of 2,935 millimetres) and, as usual, solely improved the rear legroom and the access width of the rear doors.

Young at heart When it first appeared, the 126 series S-Class was initially felt by some to be prosaic and inornate. However, within a short time, the design was recognised as being groundbreaking. This also gave the series a boost and helped it achieve its present status as a timeless, popular young classic. Currently on offer at ALL TIME STARS is a 280 SE from 1982 with exceptionally low mileage: it only has about 36,000 kilometres on the clock. In keeping with this, its overall condition is outstanding – ALL TIME STARS is offering it in its Collectors Edition (https://www.mercedes-benz.com/de/ats_vehicle/mercedes-benz-w-126-280-se/). The equipment is generously extensive, right down to the brown leather seats. This S-Class was mainly in use on the Portuguese island of Madeira. The vehicle comes complete with the on-board folder containing the service record and owner’s manual as well as the full tool kit. Before it is handed over, the 280 SE will be given a full technical check, new certification and an exhaust emission test – as well as a twelve-month ALL TIME STARS warranty.

Timeless elegance So to speak, the characteristic design features of the new S-Class can be found below the waistline. For the first time, a #mercedesbenz passenger car did not have conventional bumpers, but generously dimensioned, plastic-coated bumpers that had been seamlessly integrated into the front and rear aprons. A visual link between the front and rear aprons was provided by wide plastic side protection panels located between the wheel arches at bumper level.

Engines The two eight-cylinder engines used in the predecessor series 116 were replaced by two re-engineered units with increased displacement and light alloy crankcases. The 5.0-litre engine, which replaced the 4.5-litre grey cast iron engine, had already made its début in the 450 SLC 5.0 (C 107), while the 3.8-litre light-alloy engine was developed from the 3.5-litre V8 with the grey cast iron block. Combining greater output with lower weight, the new V8 engines offered much improved performance and better fuel economy. The carburettor and injection versions of the 2.8-litre six-cylinder engines remained unchanged in the series. A diesel version of the 126 series was once again available for export to the US. Like its predecessor, the 300 SD turbodiesel offered a turbocharged 3.0-litre five-cylinder engine, but its output was increased by 7.4 kW (10 hp) to 92 kW (125 hp).

Better efficiency Throughout the development of the new series, methods of reducing energy consumption while increasing driving comfort and safety were at the forefront. The use of weight-reducing materials and optimised aerodynamics helped the new S-Class achieve a ten per cent reduction in fuel consumption compared with its predecessors.

Less drag From the 1970s onwards, during the first major oil crisis, the issue of aerodynamics gained considerably in importance. The 126 series was the first #mercedesbenz production vehicle to be consistently developed and designed with aerodynamics in mind. The result was that, with a cd rating of 0.36 at the end of the 1970s, it already occupied a leading position in its segment by international standards. In the predecessor series 116, the cd rating had been 0.41.

Restraint systems In 1981, the driver airbag celebrated its world premiere in the 126 series. Initially, it had been available as an optional extra and offered considerably better protection against injury in the event of a frontal collision in conjunction with the safety belt. From the same year, #mercedesbenz also offered the seatbelt pretensioner for the front passenger as an optional extra. This system effectively reduced the slack in the seat belt so that it held the person more firmly in the seat in the event of an impending collision. In 1988, the series also saw the world premiere of the passenger airbag when the model was upgraded.

Crash safety The bodyshell was designed to reflect the latest safety research findings. Thanks to new design principles, the passenger cell was able to withstand an offset crash undamaged – at a collision speed of 55 km/h – although it weighed less than in the 116 series. The 126-series saloons were the world’s first production vehicles to meet the criteria for asymmetric frontal collisions.

Details for improved safety There were numerous other safety features. For example, there was the electrically adjustable steering column (optional from 1985), the automatic limited-slip differential for the six-cylinder models and acceleration skid control for the V8 models (all optional features from 1985).

Facelift Four years after the launch of the energy-saving concept, an extensive model facelift was carried out, so that in September 1985 and again at the IAA in Frankfurt, #mercedesbenz presented a completely revised model range of the 126 series. Its visual appearance was discreetly revised, primarily with regard to the bumpers and side protection panels, but also the wheels, which were upgraded from 14 to 15 inches. This also included an improved safety aspect, as larger brake discs could now be accommodated as a result. The focus, however, was on restructuring the engine options, in the course of which the S-Class was given two newly designed six-cylinder engines, which had débuted in the mid-size 124 series nine months earlier. A new addition to the range was a 4.2-litre V8 engine, which had been created by boring out the 3.8-litre engine. The 5.0-litre engine was also modified and was now equipped with an electronic ignition system and the Bosch “KE-Jetronic” electronically controlled mechanical fuel injection system which helped it generate an output of 180 kW (245 hp). The diesel export model was replaced by the new 300 SDL with 110 kW (150 hp).

Emission control In the course of model facelifts, a controlled emission control system with a three-way catalytic converter was available on request for all variants of the revised model range with the exception of the 5.6-litre models’ ECE versions. The standard version was supplied as a catalyst retrofit version, in which the vehicle was delivered without a catalytic converter and lambda sensor, but with the multifunctional mix preparation and ignition system. Retrofitting a controlled catalytic converter to a retrofit vehicle could be carried out easily at any time. This arrangement gave the customer the greatest possible flexibility in determining the time of conversion – bearing in mind that, in the 1980s, this was a considerable advantage as the supply of unleaded fuel was not yet guaranteed everywhere. From September 1986, the controlled catalytic converter became standard equipment in all #mercedesbenz passenger car models with internal combustion petrol engines; retrofit vehicles continued to be available on request until August 1989, at a corresponding price discount.

Engine with 5.6-litre engine capacity The most spectacular innovation in the engine range was a 5.6-litre eight-cylinder engine developed from the 5.0-litre V8 by extending the stroke, which generated an output of 200 kW (272 hp). On request, there was even a version with higher compression which allowed for 221 kW (300 hp) but was not available with a controlled emission control system. Even without a catalytic converter, this “ECE version” met the exhaust emission limits set by the European Economic Commission (ECE). At their release the 560 SEL equipped with this engine variant and the coupé 560 SEC were the most powerful #mercedesbenz production passenger cars built up to that time.

Production success By 1991, a total of 818,036 of these saloons had left the production halls in Sindelfingen within the twelve-year production period. From 1981 to 1991, 74,060 SEC coupés (C 126) were also built. This made the 126 series the most successful luxury class series in the company’s history.

 

Collegati o registrati per inviare un commento

Calcio

Tutte le notizie su Professionisti, Dilettanti, Giovanili, Calcio a 5, Calcio Femminile

Sport Acquatici

sportacquatici

Tutte le notizie su Canottaggio, Canoa, Nuoto, Pallanuoto, Pesca Sportiva...

Sport da Combattimento

Tutte le notizie su F.i.j.l.k.a.m., Pugilato e Scherma

    Sport di Squadra

    Tutte le notizie su Basebal, Basket, Football, Hockey, Pallavolo, Rugby...